[NetWork] 슈퍼바이져 모듈 액티브 스텐바이 변경

슈퍼바이져 모듈 액티브 스텐바이 바꾸는 명령어
Local_C4507_1#redundancy force-switchover

모듈 상태 확인(Redundancy status 가 아닌 핫 스테이터스가 되어야 한다)

Local_C4507_1#show module

Chassis Type : WS-C4507R

Power consumed by backplane : 40 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
 1        Supervisor
 2     2  Supervisor II+ 1000BaseX (GBIC)        WS-X4013+          JAE1134URZL
 3    48  10/100/1000BaseT (RJ45)                WS-X4448-GB-RJ45   JAE1134US7O

 M MAC addresses                    Hw  Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
 1 Unknown                              Unknown      Unknown          Other
 2 001d.4554.b982 to 001d.4554.b983 4.3 12.2(20r)EW1 12.2(25)EWA6     Ok      
 3 001d.4510.dfd0 to 001d.4510.dfff 1.4                               Ok      

Mod  Redundancy role     Redundancy mode     Redundancy status
----+-------------------+-------------------+-------------------
 1   Standby Supervisor  Non redundant       Disabled          
 2   Active Supervisor   Non redundant       Active