[NetWork] 슈퍼바이져 모듈 액티브 스텐바이 변경
슈퍼바이져 모듈 액티브 스텐바이 바꾸는 명령어
Local_C4507_1#redundancy force-switchover
모듈 상태 확인(Redundancy status 가 아닌 핫 스테이터스가 되어야 한다)
Local_C4507_1#show module
Chassis Type : WS-C4507R
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 Supervisor
2 2 Supervisor II+ 1000BaseX (GBIC) WS-X4013+ JAE1134URZL
3 48 10/100/1000BaseT (RJ45) WS-X4448-GB-RJ45 JAE1134US7O
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 Unknown Unknown Unknown Other
2 001d.4554.b982 to 001d.4554.b983 4.3 12.2(20r)EW1 12.2(25)EWA6 Ok
3 001d.4510.dfd0 to 001d.4510.dfff 1.4 Ok
Mod Redundancy role Redundancy mode Redundancy status
----+-------------------+-------------------+-------------------
1 Standby Supervisor Non redundant Disabled
2 Active Supervisor Non redundant Active